English
English
Build professional pan‑tilt‑zoom systems with authentic Sony FCB zoom modules and our in‑house interface boards. We deliver 4K/60 and Full HD performance, precise control, and reliable connectivity for surveillance, UAV gimbals, smart healthcare, video conferencing, robotics, and marine inspection. We are an official Sony FCB distributor authorized by Sony China since 2020. With 16 years of secondary video development, we customize the full chain from image capture to processing, conversion, and transmission.
Our platform enables accurate, low‑latency builds with STARVIS2 sensors for superior low‑light imaging. It supports 4K at 60 fps and 25x/30x optical zoom. Get simultaneous outputs (12G‑SDI, HDMI, IP, USB 3.0) and AI‑ready processing on the VRS‑UD410. Backed by multiple utility model patents and software copyrights, we provide fast customization and end‑to‑end support—from selection to after‑sales.
Capture fine detail and fast motion with UHD 60p output. STARVIS2 sensors offer high sensitivity, wide dynamic range, and clean images in challenging light—fit for large venues, city surveillance, and surgical visualization.
Identify targets at long range or inspect close‑ups with 25x or 30x optics. Fast autofocus and optional stabilization keep tracking smooth across pan and tilt without loss of clarity.
Run 12G‑SDI for long distances, use HDMI for local displays, stream over IP, and connect via USB 3.0/Type‑C to computers. Outputs can operate simultaneously; CVBS is available for legacy gear.
Leverage edge analytics on our AI‑capable board. Optimized pipelines reduce end‑to‑end delay for responsive control and synchronized multi‑camera operation.
Compact, vibration‑resistant assemblies support extended temperature ranges and clean cabling—suited to outdoor domes, mobile platforms, and marine housings.
Choose 4K or Full HD modules based on Sony FCB blocks. Match the required outputs with VRS‑UD410 or other interface boards, then add accessories or pan‑tilt units.
Build UHD PTZ systems with FCB‑ER9500 (1/1.8 inch STARVIS2, 4K/60, 25x optical zoom, 4K HDMI) or FCB‑ER9100 (4K/60p, 10x optical) for event production, aerial mapping, and detail‑critical monitoring.
FCB‑EV9520L provides 1080p output over LVDS with a 1/2.8 inch STARVIS2 sensor and 30x optical zoom—ideal for long‑range tracking in 1080p workflows.
VRS‑UD410 supports 4K/60 with HDMI + network + USB 3.0, AI processing, and flexible control protocols. Additional boards offer 3G/6G/12G‑SDI, MIPI, and CVBS. Add matched pan‑tilt mechanisms, cables, mounts, and enclosures for reliable field operation.
Provide 4K coverage for streets, campuses, and infrastructure. Use SDI in command centers and IP for VMS integration.
Integrate lightweight UHD payloads for mapping, inspection, and search. Pair Sony FCB modules or ILX‑LR1 with low‑latency HDMI/IP links and precise remote control.
Deliver low‑noise, high‑contrast imaging in ORs and telemedicine, enabling teams to see fine detail at 60p with flexible outputs for recorders and displays.
Add dynamic vision to robots and test benches with USB 3.0 or SDI pipelines and SDKs for precise control and repeatability.
Use sealed housings, long‑range zoom, and SDI/IP transmission for underwater or industrial inspection over extended distances.
We support rapid customization—signal conversion, protocol adaptation, on‑screen overlays, analytics, and synchronized multi‑camera setups—aligned to your standards and workflow. Access SDKs and support for VISCA/PELCO and custom APIs.
Typical builds include 4K/60 or 1080p60 output, 1/1.8 inch or 1/2.8 inch STARVIS2 CMOS sensors, 10x–30x optical zoom, simultaneous SDI/HDMI/IP/USB outputs, AI‑capable processing, and low‑latency control.
Pick 4K/60 for detail‑critical scenes; choose 1080p60 where bandwidth and storage are constrained.
Use 25x/30x for long‑range ID; choose lower ratios for wider coverage, considering autofocus and stabilization during motion.
Select SDI or HDMI for local switching, IP for distributed monitoring, or USB 3.0 for software‑centric control; confirm simultaneous outputs if required.
Verify operating temperature, vibration tolerance, and enclosure options for domes, outdoor mounts, drones, or marine use.
Confirm VISCA/PELCO or custom protocol support, latency targets, and integration with VMS or robot controllers.
This category covers PTZ camera modules and integrated solutions built around Sony FCB blocks plus our interface boards and accessories—components for building professional systems rather than consumer all‑in‑one domes.
Count on end‑to‑end assistance from pre‑sales consultation and product selection to custom development and after‑sales. Contact PTZ camera supplier to discuss your project or request a quote.
