English
English
These supplies deliver stable, low‑noise power for Sony FCB block cameras and our 4K I/O boards. They help ensure reliable startup, precise zoom/focus operation, and clean video in security, UAV, medical, conferencing, and industrial imaging. Validated with FCB‑ER9500, ER9100, EV9520L and boards such as VRS‑UD410, they support global input, regulated DC output, and protective features for continuous duty.
As an authorized Sony partner with 16+ years in video R&D, we test power units with FCB modules and our own interfaces. We focus on ripple control, EMI/EMC, connector fit, and thermal behavior to support image quality and long service life.
Each option is vetted for real workloads—from 24/7 CCTV to UAV payloads and surgical video—covering Sony FCB cameras, the ILX‑LR1 mapping camera, and HDMI/SDI/IP/MIPI/USB encoder stacks for robotics and inspection.
Universal 100–240 V AC input with regulated 12 V output for FCB cameras and 4K HDMI/SDI boards, with OVP/OCP/SCP protections.
Rugged models with wide temperature ranges and screw‑terminal outputs for cabinets and field boxes.
Reinforced isolation and low leakage for surgical video and healthcare devices; compliant options available.
Single‑cable power and data for IP encoders or networked interfaces, easing ceiling, mast, and mobile installs.
High‑efficiency converters stabilize camera rails from batteries with low ripple and tolerance to vibration.
Flexible 9/12/15/20 V negotiation for Type‑C interface boards—useful in labs, demos, and compact kits.
Typical support includes 100–240 V AC input and regulated 5/9/12/15/24 V outputs, from ~18 W up to 120 W+ for multi‑board stacks.
High efficiency helps reduce heat; low standby consumption suits always‑on systems.
Low ripple and tight regulation benefit sensors and serializers. OVP, OCP, SCP, and thermal safeguards protect cameras, encoders, and storage.
Fast response helps maintain voltage during lens movements or AI‑accelerator spikes.
Options include 5.5×2.1 mm and 5.5×2.5 mm barrels, locking DC plugs, JST/Molex headers, and screw terminals. Custom lengths and right‑angle plugs support neat routing and strain relief.
Center‑positive is common; we match polarity and pinout to your harness to avoid reverse‑polarity issues.
Models are available with CE, UL, FCC, CCC, and CB, plus RoHS/REACH. Wide temperature ranges and high MTBF support harsh sites and continuous duty.
Most stacks use regulated 12 V DC. Verify ranges and current in camera/board datasheets and add margin for startup and lens motion.
Select adequate peak current and fast response so zoom/focus or processing bursts do not cause dips or noise.
Choose barrel size, locking type, or terminal block to fit your harness. Matching pinout improves serviceability.
Use medical‑grade in clinical areas, PoE/PoE+ for networked installs, and industrial‑rated supplies for factory cabinets.
If adding encoders or lighting later, choose higher wattage. Critical builds can evaluate dual feeds or hot‑swap power.
We tailor outputs, cable lengths, and pinouts for Sony FCB builds. Our engineers co‑validate grounding, shielding, and filtering to minimize artifacts and speed compliance. Pre‑assembled kits are available for FCB‑ER9500/EV9520L with VRS‑UD410. We also support lifecycle and alternate sourcing to stabilize production. Contact the Power Adapters supplier team to discuss your build or request a quote.
Low noise and high MTBF help reduce downtime and artifacts.
Lightweight DC‑DC options and secure connectors handle vibration and battery swings.
Medical isolation and documentation support OR integration where safety and image quality matter.
DIN‑rail supplies and extended temperature ratings suit factory floors and mobile robots.
Clean power supports accurate color and low noise in 4K/60 HDMI/SDI workflows.
Most FCB modules run on regulated DC (often 12 V). Verify limits and current draw per model to avoid brownouts.
Pair compliant PoE/PoE+ injectors and confirm cable length and power budget for steady streaming.
Follow grounding/isolation guidelines; use medical isolation in clinics and robust mounting and strain relief in UAVs.
Account for ambient heat, airflow, vibration, and altitude derating to maintain stability and lifespan.
Q: Are your units certified for my region?
A: Models are available with CE, UL, FCC, CCC, and CB. Share target markets and we will match a suitable unit.
Q: Can one supply power both the camera and interface board?
A: Yes, if wattage and connectors are sized correctly. We offer combined harnesses for tidy integration.
Q: Do you offer sample kits and evaluation support?
A: Yes. Evaluation kits include a power unit, cables, and guidance for Sony FCB modules and our interface boards.
This category is curated for Sony FCB block cameras (e.g., FCB‑ER9500/ER9100/EV9520L), the ILX‑LR1, and our boards (e.g., VRS‑UD410), with connector and voltage options aligned to typical stacks to reduce adaptation time.
No products found
